top of page

Gluecifer 2 in 1 Heavenly Cleaner 

Gluecifer heavenly cleaner is excellent for cleaning up Glue and Adhesive foam guns.

Image 23-07-2021 at 13_edited.jpg
  • Removes 100% Of Uncured Glue

  • 2 In 1 Tin To Clean Guns & Remove Uncured Miss Applied Product

  • Fast Acting 

  • Ergonomically Designed For Easy Use

  • 500ml Tin

 To remove a tin of glue and clean gun.

 

What you need to get started: 

Safety comes first so goggles and gloves are a must, please use it in a well-ventilated area, preferably outside.

       

      1x Tin of Gluecifer Heavenly Cleaner, paper towels, gloves, Eye protection etc​

​

  • Unscrew the Gluecifer Artificial Grass Glue tin from the Gluecifer Applicator Gun and place the tin upright on the floor for later use.

  • Use the red spray nozzle and spray around the Gluecifer Applicator Gun thread and into the main valve.

  • This is a good time to keep the valve on the Gluecifer Artificial Grass Glue tin clean so give it a quick spray too.

  • Screw on Gluecifer 2 in 1 cleaner and vent into a bin with a paper towel in it to help stop blowback.

  • Keep spraying until the gun runs clear and no more glue is visible.

  • Spray a small amount onto a piece of clean paper towel and wipe the main nozzle head until clean

  • Now depressurize the gun to remove all Gluecifer cleaner inside the chamber.

​

​

​

​

 

​

​

​

​

​

​

​

​

​

​

 

 

You must make sure you clean the gun immediately after every use. Cleaning the gun should take no longer than 60 seconds.

​​

​

​

​

​

​

​

 

bottom of page