Gluecifer Applicator Gun

Please read the safety instructions before proceeding 

​

• Please ensure the flow regulator is completely wound inland trigger is locked

• Flick off the safety cap of the Gluecifer Artificial Grass Adhesive tin

• Screw the Gluecifer Artificial Grass Adhesive onto the gun clockwise with the gun in the upright position with the tin facing downwards

• Do not over tighten

• Once the Gluecifer Artificial Grass Adhesive tin is secured on the gun correctly shake it vigorously approximately 20 times 

• Unwind the flow regulator located on the back of the gun to the desired flow rate required

• When finished you can keep the Gluecifer Artificial Grass Glue attached to the gun for up to 30 days provided the Gluecifer Applicator Gun nozzle is clean or air will get into the Gluecifer Applicator Gun and therefore unusable, please ensure the flow regulator is locked if unattended or in a vehicle, etc

• To clean the gun please follow the cleaning instructions in our Gluecifer 2 in 1 Cleaner section.